Skip to main content

Bachelor/Master of Engineering in Electronic and Computer Engineering Course content

Develops in‑demand skills in software, hardware and maths, preparing graduates to build technologies for AI, energy, health, robotics and future systems

Key information

CAO points 2026 465
NFQ Level NFQ Level 8
Duration Four or five years
Attendance Full-time
Course code LM118

The first two years of the programme is common to all students on the programme and will provide a strong practical and theoretical foundation in computing and programming languages, software, digital and analogue electronics, electrical science, and engineering mathematics. During these first two years of the programme, students will be guided towards their choice of a major option to be undertaken in the years three and four of the programme.

In years three and four of the programme, students select one of the available BEng major options, and decide whether they would want to graduate with a BEng degree award or continue their studies into a fifth year to graduate with a MEng degree award. There is also the opportunity to choose a General option, where students can select modules from the various major option streams rather than specialising on a single major option.

Work experience is obtained through an eight-month period of Cooperative Education (Co-op), which is an integral part of the programme. Co-op will provide students with real-world industrial experience and practice. This will be taken in the summer at the end of second year and the first semester of the third year of the programme.

In year four, the final year of the BEng programme, students aiming to graduate with a BEng degree will undertake a major individual project, which in general aims to solve a real-world problem. The project involves advanced design and implementation work, and builds confidence by putting into practice the skills and knowledge that have been acquired throughout the programme of study.

Master of Engineering (MEng) Track (year five). The MEng track enables students to gain a broader and deeper understanding of a range of advanced topics in electronic & computer engineering including integrated circuit (IC) design, artificial intelligence, machine learning, cryptography and security, data forensics, and network security, amongst others. Students will also undertake a major individual project. Students will select the MEng track in year three of the programme, and will study the MEng track subjects in year 4.


Major options

Computer engineers will work in important application areas that include mobile phone systems, gaming, medical diagnostic and monitoring equipment, the Internet, edge devices, smart transport and energy management systems. Material covered in this option includes:

  • Software - software engineering, distributed and real-time software design, advanced operating systems, language processors
  • Digital Electronics - integrated circuits (ICs), computer architectures
  • Control – advanced control systems, machine vision
  • Data and Telecommunications - networks, communications, protocols, security
  • Signal Processing - digital signal processing, coding theory

Electronic Engineers have brought us mobile phones, digital cameras, security systems, improved weather forecasting, electronic medical devices and so many other things that we now take for granted. Material covered in this option includes:

  • Electronic Circuit Design - integrated circuits (ICs), analogue circuits, digital circuits, mixed-signal circuits
  • Data and Telecommunications - networks, communications, protocols
  • Electrical Engineering - power systems, power electronics, electromagnetics
  • Control - advanced control systems, sensors and actuators
  • Signal Processing - signal processing, VLSI signal processing

Recent times have seen a worldwide shift towards a refocused commitment on the topic of energy. Electrical energy power engineering is an important element of this activity and there is an increasing need for engineers in this discipline to work on new solutions for the electrical energy grid based on wind, solar, ocean, wave and other renewable forms of energy. Material covered in this option includes:

  • Electrical Engineering - power systems, power electronics, electromagnetics
  • Physics - thermal physics, mechanical energy, electrical energy
  • Control - advanced control systems, sensors and actuators
  • Environment - advanced electronics for the built environment

Robotic Engineering

Robotics is an exciting area of computer-controlled technology. Robotic applications are found in space exploration, deep-ocean systems, transport, product manufacturing, medical equipment, entertainment systems etc. Material covered in this option includes:

  • Robotics - advanced robotics systems, artificial intelligence, machine vision
  • Control - advanced control systems, digital control systems
  • Software - software engineering, distributed and real-time software design
  • Automation - industrial automation, sensors and actuators

General Option

This General option is aimed at students who have a broad interest in the areas of electronic and computer engineering, and want to explore several topics of the prescribed major options.


Robotics is an exciting area of computer-controlled technology. Robotic applications are found in space exploration, deep-ocean systems, transport, product manufacturing, medical equipment, entertainment systems etc. Material covered in this option includes:

  • Robotics - advanced robotics systems, artificial intelligence, machine vision
  • Control - advanced control systems, digital control systems
  • Software - software engineering, distributed and real-time software design
  • Automation - industrial automation, sensors and actuators

This General option is aimed at students who have a broad interest in the areas of electronic and computer engineering, and want to explore several topics of the prescribed major options.

LM118 programme of study in more detail

Students will initially register for the LM118 BEng in Electronic and Computer Engineering degree programme and can opt to study for four years (BEng degree) or five years (MEng degree). The LM118 programme is broken into two parts:

Part 1: Years one and two are common to all the degree options.

Part 2: Years three and four for all degree options have some common modules, but the programme has been designed to offer specialist modules in each option area.

Students who opt to complete the programme after four years will graduate with a BEng degree award. For students who opt to continue onto the MEng degree track will transfer onto the LM806 MEng degree at the end of year four rather than graduating with the BEng degree award:

  • Year 5 (year 1 of the LM806 programme) offers specialist modules that can be selected by the student.
Image
" "
Long description of flowchart

The LM118 Bachelor/Master of Engineering in Electronic & Computer Engineering program begins with two years (semesters 1–4) of a common syllabus. After that, students complete an eight-month industrial placement during the summer and semester 5.

When they return, they choose a degree track. The available Bachelor of Engineering tracks are:
 

  • Computer Engineering
  • Electronic Engineering
  • Electrical Energy Engineering
  • Robotic Engineering
  • General

Students who choose one of these tracks graduate with a Bachelor of Engineering (BEng) in Electronic & Computer Engineering (LM118).

Alternatively, students may select the Master of Engineering (MEng) track, which continues beyond semester 6 into semesters 7–10. These students graduate with a Master of Engineering (MEng) in Electronic & Computer Engineering (LK255).

In summary:

  • Years 1–2 (Semesters 1–4): Common syllabus
  • Year 3 (Summer + Semester 5): Industrial placement
  • Year 3–4 (Semesters 6–8): Specialisation in chosen track
  • Year 5 (Semesters 9–10): Only for MEng track

Graduates either complete a BE after four years or continue to a five-year integrated ME program.

Year 1-4/5 (General option with ME Pathway)

Semester 3

Module codeModule title
CE4703Computer Software 3
EE4003The Engineer as a Professional
EE4313Active Circuit Design 1
EE4523Digital Systems 2
MA4003Engineering Mathematics 3

Semester 4

Module codeModule title
EE4044Communications & Network Protocol
EE4214Control 1
EE4314Active Circuit Design 2
EE4524Digital Systems 3
MA4004Engineering Mathematics 4

Summer

Cooperative education

Each student will complete their Cooperative Education placement during the summer at the end of year two and into semester one of year three (semester 5). Students, whilst on Cooperative Education, will be asked to select their BEng major option for semester two of year three.  Students will also state wither they wish to graduate with a BEng degree award at the end of year four or to continue onto the MEng degree track at the end of year four the further year of the programme.  All students will however follow one of the following BEng major options in year three.

Semester 5

Cooperative education

Semester 6

Module codeModule title
EE4034Telecommunications Fundamentals
EE4216Control 2
EE4816Signals & Systems
Electives (Choose 2)
CE4206Operating Systems 2
CE4717Language Processors
EE4024Electrical Energy
EE4317Active Circuits 4
ET4224Sensors and Actuators

Semester 7

Module codeModule title
CE4607Computer Networks 1
CE4707Software Engineering
CE4041Artificial Intelligence
CE4817Digital Signal Processing
EE4031Modern Electrical Power Systems
EE6621ASICs 1 (Digital ASICs)
ET4031Electrical Automation
ET4021Electronics Life Cycle Engineering
EE4907Final Year Project 1

Semester 8

Module codeModule title
CE4208Distributed Systems
CE4518Computer Architectures
EE4117Electromagnetics
EE4032Tensor and GPU Fundamentals
EE4038Power Electronics
EE6622ASICs 2 (Analogue ASICs)
EE6032Communication and Security Protocols
EE6452Digital Control
EE4042Energy Management & Technology
RE4002Spatial Robotics
EE4908Final Year Project 2

Semester Master of Engineering (MEng) in Electronic & Computer Engineering degree track and options (semester 2 in year 3 is common with the BEng degree track with a selected major option)

Semester 7

Module codeModule title
CE4041Artificial Intelligence
CE4607Computer Networks 1
CE4817Digital Signal Processing 1
Elective (Choose two)
CE4706Software Engineering 1
EE4031Modern Electrical Power Systems
EE6621ASICs (Digital ASICs)
EP4407Enterprise Development
ET4021Electronics Life Cycle Engineering
ET4031Electrical Automation

Semester 8

Module codeModule title
CE4518Computer Architecture
EE4052Master of Engineering Project Preparation
EE4117Electromagnetics 1
Elective (Choose two)
CE4208Distributed Systems
EE4042Energy Demand Management
EE4038Power Electronics
EE6622ASICs 2 (Analogue ASICs)
RE4002Spatial Robotics
RE4012Machine Vision

Semester 9

Module codeModule title
EE6061Integrated Master of Engineering Project 1
Elective (Choose three)
CS6501Machine Learning and Applications
EE4031Modern Electrical Power Systems
EE6011Cryptography and Security Fundamentals
EE6021Test Development Engineering
EE6041Text Analytics and Natural Language Processing
EE6461Information Theory and Coding
EE6621ASICs 1 (Digital ASICs)
ET4021Electronics Life Cycle Engineering
ET4031Electrical Automation

Semester 10

Module codeModule title
EE6062Integrated Master of Engineering Project 2
Elective (Choose three)
CS6502Applied Big Data and Visualization
EE4032Tensor and GPU Fundamentals
EE4038Power Electronics
EE4042Energy Demand Management
EE6012Data Forensics
EE6032Communication and Security Protocols
EE6042Network and Host Security
EE6452Digital Control
EE6622ASICs 2 (Analogue ASICs)
ME6121Engineering in a Circular Economy
RE4002Spatial Robotics

Year 3 and 4 (Major options)

Each student will complete their Cooperative Education placement during the summer at the end of year two and into semester one of year three (semester 5). Students, whilst on Cooperative Education, will be asked to select their BEng major option for semester two of year three.  Students will also state wither they wish to graduate with a BEng degree award at the end of year four or to continue onto the MEng degree track at the end of year four the further year of the programme.  All students will however follow one of the following BEng major options in year three.

Semester 5

Cooperative education

Semester 6

Module codeModule title
CE4206Operating Systems 2
CE4717Language Processors
EE4816Signals & Systems 1
EE4034Telecommunication Fundamentals
EE4216Control 2

Semester 7

Module codeModule title
CE4706Software Engineering
CE4607Computer Networks 1
CE4041Artificial Intelligence
EE6621ASICs 1 (Digital ASICs)
EE4907Final Year Project 1

Semester 8

Module codeModule title
CE4208Distributed Systems
EE6032Communication and Security Protocols
CE4518Computer Architectures
RE4012Machine Vision
EE4908Final Year Project 2

Each student will complete their Cooperative Education placement during the summer at the end of year two and into semester one of year three (semester 5). Students, whilst on Cooperative Education, will be asked to select their BEng major option for semester two of year three.  Students will also state wither they wish to graduate with a BEng degree award at the end of year four or to continue onto the MEng degree track at the end of year four the further year of the programme.  All students will however follow one of the following BEng major options in year three.

Semester 5

Cooperative education

Semester 6

Module codeModule title
EE4317Active Circuits 4
ET4224Sensors & Actuators
EE4816Signals & Systems
EE4034Telecommunication Fundamentals
EE4216Control 2

Semester 7

Module codeModule title
EE6621ASICs 1
CE4607Computer Networks 1
EE4031Modern Electrical Power Systems
ET4021Electronics LIfe Cycle Engineering
EE4907Final Year Project 1

Semester 8

Module codeModule title
EE6622ASICs 2 (Analogue ASICs)
EE4032Tensor and GPU Fundamentals
EE4038Power Electronics
EE4117Electromagnetics
EE4908Final Year Project 2

 

Each student will complete their Cooperative Education placement during the summer at the end of year two and into semester one of year three (semester 5). Students, whilst on Cooperative Education, will be asked to select their BEng major option for semester two of year three.  Students will also state wither they wish to graduate with a BEng degree award at the end of year four or to continue onto the MEng degree track at the end of year four the further year of the programme.  All students will however follow one of the following BEng major options in year three.

Semester 5

Cooperative education

Semester 6

Module codeModule title
EE4034Telecommunications Fundamentals
EE4024Electrical Energy
EE4216Control 2
EE4816Signals & Systems 1
ET4224Sensors & Actuators

Semester 7

Module codeModule title
CE4817Digital Signal Processing
EE4031Modern Electrical Power Systems
ET4031Electrical Automation
PH4003Mechanical Energy
EE4907Final Year Project 1

Semester 8

Module codeModule title
EE4117Electromagnetics
EE4038Power Electronics
EE4042Energy Demand Management
PH4042Thermal Physics
EE4908Final Year Project 2

Each student will complete their Cooperative Education placement during the summer at the end of year two and into semester one of year three (semester 5). Students, whilst on Cooperative Education, will be asked to select their BEng major option for semester two of year three.  Students will also state wither they wish to graduate with a BEng degree award at the end of year four or to continue onto the MEng degree track at the end of year four the further year of the programme.  All students will however follow one of the following BEng major options in year three.

Semester 5

Cooperative education

Semester 6

Module codeModule title
CE4206Operating Systems 2
ET4224Sensors & Actuators
EE4816Signals & Systems
EE4034Telecommunications Fundamentals
EE4216Control 2

Semester 7

Module codeModule title
CE4041Artificial Intelligence
CE4817Digital Signal Processing
CE4706Software Engineering
ET4031Electrical Automation
EE4907Final Year Project 1

Semester 8

Module codeModule title
RE4002Spatial Robotics
EE6452Digital Control
CE4208Distributed Systems
RE4012Machine Vision
EE4908Final Year Project 2
© 2026 University of Limerick