fbpx EASA Part 21 Design Engineering - Module (in association with Atlantic Aviation Group) | UL - University of Limerick
Skip to main content

EASA Part 21 Design Engineering - Module (in association with Atlantic Aviation Group)

Course Details

Available: Part- Time

Duration: This programme is going to run Tuesday 24th to Friday 27th September 2019 in a single four day block.

Award: Postgraduate module

Qualification: 6 ECTS Credits @ NFQ Level 9

Faculty: Science and Engineering

Course Type: Professional/Flexible

Fees: For Information on Fees, see section below.

Contact(s):

Name:
Aileen Cherry
Address:
The Atlantic Aviation Institute
Email:
training@atlanticaviation.ie
Tel:
+353 (0)61 717 726
Mobile:
+353 (0)87 740 76 31

Brief Description

The module offers a detailed presentation and analysis of the key functions performed within EASA Design Organisations, with an emphasis on the technical disciplines required for changes to Type Certificates (TCs) of large aeroplanes. Moreover, the students will learn how to apply the essential processes which are necessary for managing effectively those design changes within the EASA environment.

This part-time postgraduate module will be delivered by Atlantic Aviation Group (AAG) in conjunction with the University of Limerick (UL). The aim is to provide students with the concepts and processes involved in the design and certification of aircraft modifications, with focus on the European Aviation Safety Agency (EASA) Certification Specification (CS) for large aeroplanes (EASA CS-25).

To suit working Aviation professionals, delivery is a blend of face-to-face tutorials/workshops supported by online learning.

The module offers a detailed presentation and analysis of the key functions performed within EASA Design Organisations, with an emphasis on the technical disciplines required for changes to Type Certificates (TCs) of large aeroplanes. Moreover, the students will learn how to apply the essential processes which are necessary for managing effectively those design changes within the EASA environment.

  • Airworthiness Framework: The Regulatory Authorities and an overview of the EASA Part 21 regulation and EASA CS-25.
  • EASA Part 21 Regulation: Regulatory requirements of EASA Part 21 in relation to Design Organisation Approvals (DOA); Requirements of each of the paragraphs of Subpart J; Roles and responsibilities of the Office of Airworthiness, Compliance Verification Engineers, Design Office, Design Engineers, and the Independent Monitoring function; Processes involved in the classification of a design change or repair; Differences between minor and major changes and repairs; Processes and procedures in classifying and approving changes repairs.
  • Certification Specifications for Large Aeroplanes: Evolution and development of EASA Certification Specifications; Content of and evolution of CS-25; Content of and usage of the various CS-25 Subparts; Content of and usage of the various CS-25 Appendices.
  • Demonstration of Compliance: The use of the Certification Plan; Processes involved in the compilation of the Compliance Record; Requirement for and development of test programmes; Requirement for and development of equipment assessment; Requirement for and development of Electrical Wiring Interconnect System (EWIS); Requirement for and development of Operational Suitability Data (OSD).
  • Professionals working or intending to work in: Part 21 Design Organisations / Part M Organisations / Part 145 Organisations; Aviation Technical Service Organisations needing to understand the Part 21 Design change process.
  • New Engineering Graduates seeking to enter this sector.

20% Aviation & Aerospace Skillnet Funding applies to those whose company is paying their fee, contact us for further details – training@atlanticaviation.ie